The Saddlebag Helmet Hanger is a non-structural motorcycle accessory designed solely for temporary helmet storage while the motorcycle is parked.
This product is NOT a safety device and is NOT designed, tested, or certified for load-bearing, crash protection, vibration resistance, or use while the motorcycle is in motion.
An original, proprietary mechanical design developed entirely from a blank canvas in parametric CAD software. This non-structural asset is engineered specifically for parked motorcycle utilization, providing an immediate, high-utility storage solution. Batch-manufactured from scratch using premium, weather-resistant, and high-impact ASA engineering polymers to withstand harsh environmental conditions and intense UV exposure without degrading structural tolerances.
While this design is cable-lock compatible, it does not guarantee absolute theft prevention or asset security.
Made from premium ASA for outdoor durability
UV, heat, and weather resistant material
Foam-backed to help reduce paint contact
Fits Harley-Davidson saddlebags & most tour packs with ~6.5 mm (1/4") rolled edge
Cable lock compatible opening
Tool-free installation
Lightweight, non-structural design
FOR PARKED USE ONLY — NEVER USE WHILE RIDING OR IN MOTION
This product is a non-load-bearing, non-structural accessory
Not intended to support helmets during riding, transport, or vibration conditions
Do not use for people, pets, or any item other than a helmet while parked
Always remove before operating or moving the motorcycle
Inspect before each use; discontinue if cracked, worn, or damaged
Minor cosmetic variations are normal in 3D printed products and do not affect function
By purchasing or using this product, the user voluntarily assumes all risk associated with installation and use. The user is solely responsible for determining compatibility, safe application, and proper use.
This product is provided “AS IS” and “WITH ALL FAULTS” without warranties of any kind, express or implied, including but not limited to merchantability or fitness for a particular purpose.
To the fullest extent permitted by law, D&D 3D Printing and More LLC shall not be liable for any damages, including but not limited to property damage, theft, loss, injury, or death arising from use, misuse, improper installation, modification, or failure to follow instructions.
Designed specifically for Harley-Davidson touring motorcycles
Durable outdoor-rated ASA material
Foam-backed paint protection design
Lightweight, removable, and parking-use only solution
Proudly designed and manufactured by D&D 3D Printing
The Saddlebag Helmet Hanger is a non-structural motorcycle accessory designed solely for temporary helmet storage while the motorcycle is parked.
This product is NOT a safety device and is NOT designed, tested, or certified for load-bearing, crash protection, vibration resistance, or use while the motorcycle is in motion.
An original, proprietary mechanical design developed entirely from a blank canvas in parametric CAD software. This non-structural asset is engineered specifically for parked motorcycle utilization, providing an immediate, high-utility storage solution. Batch-manufactured from scratch using premium, weather-resistant, and high-impact ASA engineering polymers to withstand harsh environmental conditions and intense UV exposure without degrading structural tolerances.
While this design is cable-lock compatible, it does not guarantee absolute theft prevention or asset security.
Made from premium ASA for outdoor durability
UV, heat, and weather resistant material
Foam-backed to help reduce paint contact
Fits Harley-Davidson saddlebags & most tour packs with ~6.5 mm (1/4") rolled edge
Cable lock compatible opening
Tool-free installation
Lightweight, non-structural design
FOR PARKED USE ONLY — NEVER USE WHILE RIDING OR IN MOTION
This product is a non-load-bearing, non-structural accessory
Not intended to support helmets during riding, transport, or vibration conditions
Do not use for people, pets, or any item other than a helmet while parked
Always remove before operating or moving the motorcycle
Inspect before each use; discontinue if cracked, worn, or damaged
Minor cosmetic variations are normal in 3D printed products and do not affect function
By purchasing or using this product, the user voluntarily assumes all risk associated with installation and use. The user is solely responsible for determining compatibility, safe application, and proper use.
This product is provided “AS IS” and “WITH ALL FAULTS” without warranties of any kind, express or implied, including but not limited to merchantability or fitness for a particular purpose.
To the fullest extent permitted by law, D&D 3D Printing and More LLC shall not be liable for any damages, including but not limited to property damage, theft, loss, injury, or death arising from use, misuse, improper installation, modification, or failure to follow instructions.
Designed specifically for Harley-Davidson touring motorcycles
Durable outdoor-rated ASA material
Foam-backed paint protection design
Lightweight, removable, and parking-use only solution
Proudly designed and manufactured by D&D 3D Printing
