Are your kitchen or bathroom drawers sagging, binding, or pulling completely out of the track?
The original factory plug-in sockets used in vintage cabinets were made from brittle plastic designed to fail. Even worse, when they break, they often rip out and strip the pre-drilled pinholes in the thin backboard, making original snap-in style parts impossible to reuse.
Our Universal Screw-In Conversion Kit changes the game. By moving away from weak plastic pegs and introducing a wide-footprint mounting plate, this heavy-duty kit screws directly into completely clean, solid wood for a permanent, lifetime repair.
Why Our Re-Engineered Brackets Outperform the Rest:
Unbreakable 13-Wall Solid Perimeter: Standard cheap 3D prints or corporate imports use thin, hollow infills. Our brackets are manufactured using an ultra-dense, 13-layer solid loop layout. They are essentially solid plastic blocks that will not warp, flex, or split.
Tested 55lb Support Capacity: Engineered to handle the heaviest kitchen setups. A single bracket successfully supports a 55-pound static load without failing, giving your drawer tracking a massive safety buffer for heavy cast iron skillets, Dutch ovens, and ceramic dinner plates.
Smart Universal Symmetrical Fitting: No more worrying about ordering the wrong side. Our clever, non-handed design features mirrored clearance channels. You can use the exact same socket on either the left or the right side by simply rotating the part 180 degrees.
Flawless Low-Profile Clearances: Features an ultra-deep 31.75mm alignment cup to completely stop wobbly drawer play while keeping a slim 10.1mm side protrusion depth. This ensures a perfect fit that stays safely clear of your moving drawer box path to prevent sticking.
Pro-Grade Flush Counterbores: Built-in 7mm flat counterbores allow your mounting hardware to sit perfectly flush. The 3.5mm thick base plate maintains original track depth, so your drawer box glides all the way back and seals completely flush with the cabinet exterior.
Complete Hassle-Free Repair Kit: No tedious trips to the local hardware store required. Every single pair ship with the exact 8 premium #6 x 5/8" pan-head wood screws needed for a quick 5-minute install.
Free Cabinet-Matching Aesthetics: Choose from Classic White or Stealth Black at no extra charge to blend seamlessly into your existing cabinet interior.
What’s Included:
(2) Heavy-Duty Universal Symmetrical Conversion Sockets (Fits Left or Right Side)
(8) Premium #6 x 5/8" Truss/Pan-Head Wood Screws
(Proudly designed, tested, and manufactured in the USA)
Hardware Compatibility & Cross-Reference Checklist
To ensure a perfect fit before you buy, verify your existing hardware matches any of the industry-standard dimensions or obsolete brand part numbers below:
Direct OEM Brand Replacement For: Discontinued Merillat cabinet rear socket part numbers 471037 (Left), 471029 (Right), 3808, and 3809.
Aftermarket Cross-Reference Fitment: Direct upgrade replacement for generic retail part catalog numbers Swisco 32-012, Swisco 32-119, and Prime-Line R 7211 rear bracket setups.
Metal Drawer Track Fitment: Engineered explicitly to fit standard 1-inch European-style epoxy-coated bottom-mount tracks stamped CL500, DL500, CR500, or DR500.
Are your kitchen or bathroom drawers sagging, binding, or pulling completely out of the track?
The original factory plug-in sockets used in vintage cabinets were made from brittle plastic designed to fail. Even worse, when they break, they often rip out and strip the pre-drilled pinholes in the thin backboard, making original snap-in style parts impossible to reuse.
Our Universal Screw-In Conversion Kit changes the game. By moving away from weak plastic pegs and introducing a wide-footprint mounting plate, this heavy-duty kit screws directly into completely clean, solid wood for a permanent, lifetime repair.
Why Our Re-Engineered Brackets Outperform the Rest:
Unbreakable 13-Wall Solid Perimeter: Standard cheap 3D prints or corporate imports use thin, hollow infills. Our brackets are manufactured using an ultra-dense, 13-layer solid loop layout. They are essentially solid plastic blocks that will not warp, flex, or split.
Tested 55lb Support Capacity: Engineered to handle the heaviest kitchen setups. A single bracket successfully supports a 55-pound static load without failing, giving your drawer tracking a massive safety buffer for heavy cast iron skillets, Dutch ovens, and ceramic dinner plates.
Smart Universal Symmetrical Fitting: No more worrying about ordering the wrong side. Our clever, non-handed design features mirrored clearance channels. You can use the exact same socket on either the left or the right side by simply rotating the part 180 degrees.
Flawless Low-Profile Clearances: Features an ultra-deep 31.75mm alignment cup to completely stop wobbly drawer play while keeping a slim 10.1mm side protrusion depth. This ensures a perfect fit that stays safely clear of your moving drawer box path to prevent sticking.
Pro-Grade Flush Counterbores: Built-in 7mm flat counterbores allow your mounting hardware to sit perfectly flush. The 3.5mm thick base plate maintains original track depth, so your drawer box glides all the way back and seals completely flush with the cabinet exterior.
Complete Hassle-Free Repair Kit: No tedious trips to the local hardware store required. Every single pair ship with the exact 8 premium #6 x 5/8" pan-head wood screws needed for a quick 5-minute install.
Free Cabinet-Matching Aesthetics: Choose from Classic White or Stealth Black at no extra charge to blend seamlessly into your existing cabinet interior.
What’s Included:
(2) Heavy-Duty Universal Symmetrical Conversion Sockets (Fits Left or Right Side)
(8) Premium #6 x 5/8" Truss/Pan-Head Wood Screws
(Proudly designed, tested, and manufactured in the USA)
Hardware Compatibility & Cross-Reference Checklist
To ensure a perfect fit before you buy, verify your existing hardware matches any of the industry-standard dimensions or obsolete brand part numbers below:
Direct OEM Brand Replacement For: Discontinued Merillat cabinet rear socket part numbers 471037 (Left), 471029 (Right), 3808, and 3809.
Aftermarket Cross-Reference Fitment: Direct upgrade replacement for generic retail part catalog numbers Swisco 32-012, Swisco 32-119, and Prime-Line R 7211 rear bracket setups.
Metal Drawer Track Fitment: Engineered explicitly to fit standard 1-inch European-style epoxy-coated bottom-mount tracks stamped CL500, DL500, CR500, or DR500.
